Products purpose

Saitering muffle furnaces are applied to Colleges, Universities and Research institutions, process the sintering of cermet material and ceramic material, heat treatment of some monocrystal, refractory material reheat shrinkage researching under high temperature, and used for small batch production.

Main features:

1. Furnace chamber material use vacuum formed Al2O3 ceramic fiber materials, no powder pull off under high temperature, small heat capacity, and energy saving more than 50%.
2. Heavy duty double layer structure. Lower teperature in outside case.
3. Microcomputer PID control module, enabling precise temperature control and constant temperature requirements
4. Temperature control with 2groups/16 segments programmable.
5. Built in over temperature alarm and protection allows for operation without attendant.

Specifications:

Name	1000℃ tube resistance furnace
Maximum temperature	1000℃(for short time)
Working temperature	950℃ (continuous)
Heating rate	10-30oC/min, it will take 15-30minutes from room temperature to 1000oC
Tube material	Quartz tube
Tube size	Dia 80x1000mm
Working size	300mm
Temperature control	16 steps programmable and PID automatic control
Voltage	AC 208-240V Single Phase,50/60 Hz
Power	4KW
Heating element	Resistance wires
Thermocouple	K-type
Furnace atmosphere	Nitrogen, Argon and other inert gases
Vacuum value	-0.098MPa
Standard accessories	high temperature gloves 1 pair, crucible tong 1pc,,power line 1 pc
Warranty	One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty.)

 tube resistance furnace

Model	Heating zone size	Tube size dia*length	Max. temp.	Operating    temp.	Voltage	Power	Heating element	Temperature control accuracy
STR TF40-10	300mm	Φ40×1000mm	1000oC	950oC	220V	2KW	Resistant wire	±1oC
STR TF60-10	300mm	Φ60×1000mm	1000oC	950oC	220V	3KW	Resistant wire	±1oC
STR TF80-10	300mm	Φ80×1000mm	1000oC	950oC	220V	4KW	Resistant wire	±1oC
STR TF100-10	300mm	Φ100×1000mm	1000oC	950oC	220V	5KW	Resistant wire	±1oC
STR TF40-12	300mm	Φ40×1000mm	1200oC	1150oC	220V	2KW	Resistant wire	±1oC
STR TF60-12	300mm	Φ60×1000mm	1200oC	1150oC	220V	3KW	Resistant wire	±1oC
STR TF80-12	300mm	Φ80×1000mm	1200oC	1150oC	220V	4KW	Resistant wire	±1oC
STR TF100-12	300mm	Φ100×1000mm	1200oC	1150oC	220V	5KW	Resistant wire	±1oC

Muffle furnace

Model	Volume	Chamber size W×L×H	Max. temperature		Operating temperature		Power supply	Heating element	Temp. Precision
STR M3-10	3L	150×150×100mm	1000oC		950oC		220V/2KW	Resistant wire	±1oC
STR M6-10	6L	180×230×150mm	1000oC		950oC		220V/3KW	Resistant wire	±1oC
STR M8-10	8L	200×300×120mm	1000oC		950oC		220V/4KW	Resistant wire	±1oC
STR M18-10	18L	250×300×250mm	1000oC		950oC		220V/5KW	Resistant wire	±1oC
STR M30-10	30L	300×500×200mm	1000oC		950oC		380V/10KW	Resistant wire	±1oC
STR M2-12	3L	150×150×100mm	1200oC		1150oC		220V/2KW	Resistant wire	±1oC
STR M6-12	6L	180×230×150mm	1200oC		1150oC		220V/3KW	Resistant wire	±1oC
STR M8-12	8L	200×300×120mm	1200oC		1150oC		220V/4KW	Resistant wire	±1oC
STR M18-12	18L	250×300×250mm	1200oC		1150oC		220V/5KW	Resistant wire	±1oC
STR M30-12	30L	300×500×200mm	1200oC		1150oC		380V/10KW	Resistant wire	±1oC

 

Options:

1. Optional large screen paperless recorder, to achieve real-time temperature curve recorded with a memory card of experimental data analysis and printing.

2. Optional installation of air intake, can feed into air and inert gas.

3. Also install an exhaust chimney connecting stainless steel bellows, so that the furnace high temperature volatile toxic gas emissions to a specified location.