产品详情

Product Overview for Rotary Tube Furnace

旋转管式炉产品概述

RTF D80/400/12 is a  OD80mm ROTARY tube furnace with complete vacuum sealing flanges and rotating device.

RTF D80/400/12是一台OD80mm旋转管式炉，配有完整的真空密封法兰和旋转装置。

Furnace tube was build with Quartz tube, tube inside build with stiring blades, which can make the heated particular material in a very good heated uniformity.  Rotating speed 0.1-5RPM freely adjustable, heating zone 400mm in length and controlled by a precision 30 segments of digital temperature controllers independently. The heating zone is heated by HRE Heating wires up to 1200°C. 

炉管采用石英管，炉管内部采用搅拌叶片，可以使被加热的特定材料具有很好的加热均匀性。转速0.1-5RPM可自由调节，加热区长度400mm，由30段精密数字温度控制器独立控制。加热区由HRE加热丝加热至1200°C。

It is an excellent furnace to process powder materials, and also can be used for nano or film growth by CVD.

它是一种极好的处理粉末材料的熔炉，也可以用于CVD的纳米或薄膜生长。

Main Features主要特点

Tmax 1100 °C，works＜1050

设计温度 1100°C，工作温度＜1050

Rotating tube furnace旋转管式炉

Dual steel structure, split furnace chamber easy access to the furnace tube

双钢结构，分体式炉室易于接近炉管

Multiple atmosphere processes in a single cycle are available

可在一个循环中使用多个大气过程

Fiber-insulated chamber with all round heating wires ensure uniform temperature

全圆形加热线的纤维绝缘室确保温度均匀

Intelligent temperature controller with programmable 30 segments

具有可编程30段的智能温度控制器

Quartz tube with blades build inside for material stiring

石英管内置叶片，用于搅拌材料

Long life type N thermocouple

长寿命N型热电偶

Safety Measures安全措施

Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.

内置电流表和双电压表，便于监测和故障排除。

Overheat protection shuts down the tube furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions

如果温度超出可接受范围（请参阅控制器手册），或者热电偶损坏或出现故障，过热保护将关闭管式炉

Power failure protection resumes furnace operation right after the point of failure when power is reestablished

电源故障保护在故障点后重新供电时立即恢复熔炉运行

Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot

基于微处理器的自校正PID控制提供了具有最小超调的最佳热过程

Technical Specifications

Application Notes应用说明

1、Don't fill any explosive gasses such as Hydrogen or Methane into the furnace tube without necessary safety controls and supervision

在没有必要的安全控制和监督的情况下，不要向炉管中注入任何爆炸性气体，如氢气或甲烷

2、1700C tube furnaces with alumina tube are designed for use under vacuum and low pressure; 0.2 bars / 3 psi / 0.02 MPa

带氧化铝管的1700C管式炉设计用于真空和低压下使用；0.2巴/3磅/平方英寸/0.02兆帕

3、To minimize the cracking rate of the ceramic tubes, please change the position (mark four points on the tube) each batch

为了最大限度地降低陶瓷管的破裂率，请每批更改位置（在管上标记四点）

4、Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating

随着使用时间的延长，耐火陶瓷表面可能会出现小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复